If you've had the same drain snaked twice this year, the clog isn't the problem β€” the pipe is. A snake bores a hole through grease, roots and scale and leaves the rest stuck to the pipe wall, where it catches the next load of debris. Hydro jetting washes the pipe back to bare wall, so the line drains like it did when it was new and stays that way much longer.

We jet residential sewer laterals, kitchen lines and commercial grease lines across Knox, Blount, Anderson and Loudon counties. Call (865) 284-2424 and we'll put a camera in the line before we quote anything.

When Hydro Jetting Is the Right Call

A single slow bathroom sink doesn't need it β€” that's a routine drain cleaning job. We reach for the jetter when:

  • The clog keeps coming back. A line that backs up again within weeks of snaking still has buildup on the walls.
  • Roots have found the joints. Mature oaks and maples in Sequoyah Hills, Fourth and Gill, Fountain City and Bearden send fine roots into older clay joints. A root-cutting nozzle shears them flush with the pipe.
  • Kitchen grease has hardened in the line. Years of rinsed pans leave a waxy ring that narrows a 2-inch kitchen line to a pencil-width channel. Hot, high-pressure water melts and flushes it.
  • Cast iron has scaled up inside. Mid-century cast iron drains grow rough tuberculation that snags paper and debris. Jetting knocks it down and restores flow.
  • You need a clean line to see it. Before a lining, a home sale or a repair quote, a jetted pipe gives the camera a clear view of every crack and offset.

How a Hydro Jetting Visit Works

  1. Camera first. We run a sewer camera from the cleanout and show you the footage, so you see what's in the line and whether the pipe can take jetting.
  2. Pick the nozzle and pressure. A penetrating nozzle opens a hard blockage, a root cutter handles intrusion, and a flushing nozzle scours the walls. Pressure is matched to the pipe β€” up to 4,000 PSI for sound PVC and cast iron, much less for fragile clay.
  3. Jet the full length. The hose pulls itself up the line with rear-facing jets, scrubbing the wall and washing debris down to the city main.
  4. Camera again. We re-inspect so you can see the clean pipe and know whether anything structural still needs attention.

Most residential main lines take one to three hours, start to finish.

Is Hydro Jetting Safe for Older Knoxville Pipes?

Usually β€” and the camera tells us when it isn't. Sound PVC and cast iron handle full pressure easily. Clay tile and the tar-paper Orangeburg pipe found under some 1940s–60s Knoxville homes are another story: if the camera shows a cracked, collapsed or bellied section, jetting can make it worse, and we'll tell you so. In that case the honest fix is sewer line repair or trenchless pipe lining, not a cleaning you'll be paying for again in six months.

What Hydro Jetting Costs

Jetting a residential main sewer line in the Knoxville area typically runs $300–$600, including the camera inspection. What moves the price: whether there's an accessible cleanout (if not, we can install one), how long the line is, and how heavy the roots or grease are. Commercial grease lines are quoted on site. You get a written price before we start, and Bear Care Club members take 10% off.

Grease Line Jetting for Restaurants and Businesses

A commercial kitchen line can close a restaurant on a Friday night. We jet grease lines between the kitchen and the interceptor, clear floor drains, and set up a cleaning schedule based on how fast your line actually loads up β€” so it gets done on a slow morning, not during service. More on our commercial plumbing work.

Schedule Hydro Jetting in Knoxville

We jet lines across Knoxville, Farragut, Maryville, Oak Ridge, Powell, Lenoir City and the rest of Knox, Blount, Anderson and Loudon counties. Call (865) 284-2424 β€” we're licensed and insured, TN CMC-A #83354 β€” and we'll start with the camera.

Frequently Asked Questions

Most residential main sewer lines run $300–$600 including the camera inspection. Price depends on cleanout access, line length, and how heavy the roots or grease are. Commercial grease lines are quoted on site, and you get a written price before any work starts.

For a single slow fixture, a snake is cheaper and works fine. For recurring clogs, roots, grease or scale, jetting is better because it cleans the whole pipe wall instead of punching one hole through the blockage, so the clog doesn't rebuild as quickly.

Not when the pipe is sound and the pressure is matched to it. That's why we camera-inspect first. If the camera shows cracked clay, collapsed Orangeburg or a broken section, we won't jet it β€” we'll show you the footage and talk through repair or lining instead.

It cuts roots flush and clears the line, but roots will grow back through the same open joints over time β€” often within one to two years. If roots are a repeat problem, lining the pipe seals the joints so they can't get back in.

Most homes never need it on a schedule β€” only when there's a problem. Homes with known root intrusion often jet every 12–24 months, and restaurants with heavy grease loads may need it every few months. The camera footage tells us the right interval for your line.

Jetting works best from an outdoor or basement cleanout. If your home doesn't have an accessible one, we can install a cleanout, which also makes every future drain or sewer service faster and cheaper.

Customer Reviews

Knoxville Homeowners Trust Honey Bear

β˜…β˜…β˜…β˜…β˜…5.0 rating

Need a Plumber?

Honey Bear is ready to help today!

Call Now